Export Variable doesn't work AC800FR&AC900FR
Hi
I have a project (Freelance2016SP1) with AC900FR and AC800FR.
My problem is in a AC800FR.
I have some exported variables that mark fine in the controller but put another value on the block join line. In the drawing it is appreciated.
This does not happen with all the exportable variables only with some of both AC900FR and AC800FR
It does not update the value of 7.525 but the input value S_FIT_599.
What happens?
How can I solve that
Thank you
Regards
I have a project (Freelance2016SP1) with AC900FR and AC800FR.
My problem is in a AC800FR.
I have some exported variables that mark fine in the controller but put another value on the block join line. In the drawing it is appreciated.
This does not happen with all the exportable variables only with some of both AC900FR and AC800FR
It does not update the value of 7.525 but the input value S_FIT_599.
What happens?
How can I solve that
Thank you
Regards
Asked 18 days ago
Answers
0
Hello,
If the variable is directly selected in online mode, the source value is obtained (Always the source value also if you are selecting the exported variable on the importing station).
If the signal line is selected in one program (e.g. here in another resource), the value is obtained, which is exchanged via the lateral communication.
It seems that lateral communication is not longer working properly.
Unfortunately, in the Freelance versions from 2013, the loading of selected objects was abolished (has always served me well in previous versions with such problems).
According to the Freelance Support, there should be no problem in the LatCom in version V2016.
:-( Wrongly thought
I fear your problem can now only be fixed via load entire station.
Regards
T.R.
If the variable is directly selected in online mode, the source value is obtained (Always the source value also if you are selecting the exported variable on the importing station).
If the signal line is selected in one program (e.g. here in another resource), the value is obtained, which is exchanged via the lateral communication.
It seems that lateral communication is not longer working properly.
Unfortunately, in the Freelance versions from 2013, the loading of selected objects was abolished (has always served me well in previous versions with such problems).
According to the Freelance Support, there should be no problem in the LatCom in version V2016.
:-( Wrongly thought
I fear your problem can now only be fixed via load entire station.
Regards
T.R.
Answered 18 days ago
Add new comment