MB300 Upload: There are no node objects under this network object
I am using the object from the restored maintenance backup. Node name and network number are similar to the old configuration.
Any idea how to fix this issue?
Can you insert an image clearly depicting the Control Structure and your MB300 networks, RTA and controllers and a second image where the Service Structure is shown with the MB300 relevant services expanded down to service provider level?
If you have ended up with multiple control network objects you can drag & drop the Advant Controllers from one of the networks to another (this retains GUID, logs, etc.).
Also, throw in the results of a execution of the Structural Consistency Checker tool, "afwsct.exe" in case there is a structural error between the network object and controller objects.
> "Node name and network number are similar to the old configuration."
How "similar" ?? This can potentially be a problem. You need to use the SAME network number. ( you can of course change the NODE number of the RTA board)
Each AC400 object "Control Connection" specifies the Network/Node/LF/LR of the object. The network numbers have to match. And they really should be Network 11 ( or 21, 31 etc ). There are several known errors that can occurs with subscriptions, object locking and RTA board loading if these numbers are incorrect.