MOD Composer is not communicating with MOD CS
I am using MOD Composer(Advabuild 3.7) in one Hyper-V server & MOD Connectivity server in Other Hyper-V Server.
I Compiled & Installed project MOD Control Builder, after doing this i am not able communicate with my MOD CS.
In Composer PAS System Status showing unhealthy status(RED). I Checked RTA board of both Composer & CS eDCN port is healthy(Green light).
In MOD Connectivity server PAS is failed at OMF stage.
Any one please help me resolve the issue.
Answer this question Follow
Pls. check on the CS if there is an OPCServer (incl. Basic History Service 800xA) running. We have seen the CS crashing during boot when there were "clients" trying to access data in early boot state.
You can run
"C:\Program Files (x86)\ABB 800xA\SystemServices\DxBase\driver\Management Tool.exe" to check if PU410 is ok.
What are the operating Systems are you using?
Other questions needing answers
Legacy DCS >
Advant MOD 300 >
Application Knowledge Store (AKS) will no longer be available after the 31 July 2021.
We are enhancing our Customer and Partner experience and will be migrating data from AKS to the new portal.
During the transition please direct your questions to:
If you are an ABB customer with a CARE Agreement you can access our Customer Portal, where you can find solutions and ask questions, and communicate directly with ABB.
If you are not an existing CARE customer with ABB please contact your local ABB sales office.
For our authorised Partners you can directly access additional support information in the Partner Portal