How to run SCADA through soft controller in ABB 800XA V5.1
I have taken a backup from my Enginering station PC run it my laptop through Vmware workstation.
I can go to control builder in online through test mode.
I have a soft controller
if i want to run my system through SCADA i cant run.
When i download the project then the below error is come.
Could you tell me the process step by step how can i run the SCADA view through soft controller?
Error 9159: Controller:HW Build version for controller is not supported by Control Builder or differs between dependent controllers
First, RTFM. Search for "Simulation" in the on-line help.
Do not change the Controller Hardware type. Enable "Simulation of Hardware" and Mark the Controller as "Simulated"
Ensure that you have a configured and connected ethernet port with the correct IP address in your VM.