CP600 Trend Problem
In CP651 display ,I use historicTrend but the graph not plot line.
My step follow > add analog tag name TagA8 (Range 0-100) in Trend > curve 1 Trend (attach to... ) > Select HistoricTrend.trend > Trend1 > Name1tag1 but Problem is the graph not plot line.
The setting details are in the attached picture.
My system connect between PM591 and CP651.




Number 22 is analog value.
Please advise me how to fix it.
Best regards.
My step follow > add analog tag name TagA8 (Range 0-100) in Trend > curve 1 Trend (attach to... ) > Select HistoricTrend.trend > Trend1 > Name1tag1 but Problem is the graph not plot line.
The setting details are in the attached picture.
My system connect between PM591 and CP651.




Number 22 is analog value.
Please advise me how to fix it.
Best regards.
Voted best answer
Hi,
Here below is a working example of historical trend. I could recommend in your case first to try with a fixed Min Y and Max Y settings. Check also DataLink value.



Here below is a working example of historical trend. I could recommend in your case first to try with a fixed Min Y and Max Y settings. Check also DataLink value.
Answers
Thank you for your help.
Now I can fix by change automation builder version from 2.2 to version 2.0.
But This make my project file can't open by old automation builder version.

Now I can fix by change automation builder version from 2.2 to version 2.0.
But This make my project file can't open by old automation builder version.

Hi,
I'm not quite sure if you can open project, created in 2.2 with 2.0. Most probably not.
The panel builder 600 is available also outside Automation Builder, try with it.
My example is created with 2.0, I don't have 2.2
BR/
Add new comment