HOW to setup PM867 controller's time?
The Controller had some warning?HOW to deal it?
Asked 6 months ago
Answers
0
Read the manual or online help!!
The 800xA "network" manual has an entire chapter designated for your question!
If you feach time via SNTP from a Microsoft Windows computer, don't forget to adjust AnnounceFlags.
The 800xA "network" manual has an entire chapter designated for your question!
If you feach time via SNTP from a Microsoft Windows computer, don't forget to adjust AnnounceFlags.
0
- You can use external time from GPS using SNTP ( Check the SNTP Setting in the controller and enter the IP address of the GPS)
- If you are looking to enter the controller time online - you can create the program for system diagnostic -> Go online -> Select Function Block -> Interaction Window -> Set the time
Answered 6 months ago
0
Hello,
the scenario, you get the message "No time sync" in master controller when controller acts as an independent master/not taking any time pulse from any external source.
then you can set time from the CBM-tools-setup-timeset (possible only when time set enabled in true in H/W settings) this is true upto Sv5.1 Rev-x
Starting from Sv6.0------>Time set function has been removed from CBM to ensure GPS should be used to avoid SOE time lags/leads causing false info to production team. But still you can set time from CS by allowing time set function=true.
So looks you are in Sv6.0 or later be introduce GPS and follow the rules as per manual its simple and straight forward.
the scenario, you get the message "No time sync" in master controller when controller acts as an independent master/not taking any time pulse from any external source.
then you can set time from the CBM-tools-setup-timeset (possible only when time set enabled in true in H/W settings) this is true upto Sv5.1 Rev-x
Starting from Sv6.0------>Time set function has been removed from CBM to ensure GPS should be used to avoid SOE time lags/leads causing false info to production team. But still you can set time from CS by allowing time set function=true.
So looks you are in Sv6.0 or later be introduce GPS and follow the rules as per manual its simple and straight forward.
Add new comment