Freelance System IP Change from 172.16..4.x to 186.204.8.xx
My Customer requested to change all his Freelance 800F and 900F Controller from 172.16.4.x to 186.204.8.xx. Also all his operator stations, Engineering Stations and Domain Controllers.
Does ABB Freelance support this subnet range.
You can use any subnet for Freelance nodes. To change the IP of the controllers:
1. AC 800F: set the rotary switch on Ethernet cards to 0 and set the address through diagnostic port;
2. AC 900F: set the IP address through the display or diagnostic port;
Please check if the time synchronization is working on the new subnet.
Hope this helps,