800xa 6.X and Splus Engineering 2.1 on same client node
Can anyone provide information regarding having 800xa 6.x and Splus 2.1 Enginnering (harmony) on same client box. There had been license server issues, have they been addressed or are there other solutions, that don't involve a separate engineering station for 800xa screens and Infi90 Harmony logic
For SPE and 800xA for Harmony: if you wished to have an Engineering screen for both, I would suggest that you load an 800xA system with AS and CS. You will need a separate client (not a single node AS+CS+CL). The SPE Server needs to be separate to the other nodes. Then you can create a 800xA Client. From the client have a RDP session to the SPE Server ot SPE Client. The licensing tool usually clash, as they are a different version, however the RDP session can sit alongside your normal screen. If you have 2 screens this works very effectively. Obviously you could also have an SPE client with RDP to an 800xA client.