CI867 Communication
Dear all,
I am here to know regarding the serial communication TCP/IP protocol using CI867Module. When I am trying to communicate with the slave showing error in the Mbtcpconnect which is -6811(not configured in tree). Kindly help me out to solve this issue.
One more thing please kindly share what are the libraries connected in hw libraries which are required for the CI867 communication Establishment.
Regards,
V Chandra Kishore
I am here to know regarding the serial communication TCP/IP protocol using CI867Module. When I am trying to communicate with the slave showing error in the Mbtcpconnect which is -6811(not configured in tree). Kindly help me out to solve this issue.
One more thing please kindly share what are the libraries connected in hw libraries which are required for the CI867 communication Establishment.
Regards,
V Chandra Kishore
Asked 10 months ago
Answers
0
Hi,
-6811 = MBTCPConnect = Protocol object is not found
Seems you didn't attach the protocol to your CI867 module. See below example for connected libraries and protocols.
Look this link too:
https://forum-controlsystems.abb.com/...
-6811 = MBTCPConnect = Protocol object is not found
Seems you didn't attach the protocol to your CI867 module. See below example for connected libraries and protocols.
Look this link too:
https://forum-controlsystems.abb.com/...
0
Dear sir
Please review attached snap.
Please review attached snap.
Answered 10 months ago
0
- "In license status viewer it is showing AC800M_TCP_lib no such feature exists"
That explains the problem - in 800xA using of ModbusTCP module requires separate license, which you have to buy
3BSE043660R3
CI867 Modbus TCP Software License 800xA
That explains the problem - in 800xA using of ModbusTCP module requires separate license, which you have to buy
3BSE043660R3
CI867 Modbus TCP Software License 800xA
0
Hi
Wire break can't be detected in Port-2, so enabling Ch2 media redundancy not possible.
Anyway there is speed limitation already there.
Wire break can't be detected in Port-2, so enabling Ch2 media redundancy not possible.
Anyway there is speed limitation already there.
Answered 10 months ago
Add new comment