Service connection status
Hi,
I have met a problem when i upgraded my 800xa 5.1 system to 6.1.
I followed the manual when doing this migration.
Now too the problems i have met, when looking in the AFW Service connection status all status shows an red cross.
When looking in plant explorer system status viewer the status shows a green color.
Everything seems to be working fine its just the red crosses that makes me think that there is some problem.
Thanks for taking your time
/Alexander
I have met a problem when i upgraded my 800xa 5.1 system to 6.1.
I followed the manual when doing this migration.
Now too the problems i have met, when looking in the AFW Service connection status all status shows an red cross.
When looking in plant explorer system status viewer the status shows a green color.
Everything seems to be working fine its just the red crosses that makes me think that there is some problem.
Thanks for taking your time
/Alexander
Asked 1 month ago
Answers
0
The Afwsevicestatus was always more accurate than the AFW Service connection. But obviously in your case it’s not the case. Have you tried so start afwservicestatus as administrator or 800xAinstaller ? If your current account is not allowed to view service structure it may be red.
Answered 1 month ago
0
The tool you refer to is mainly a connection viewer, not service status viewer.
I know the connection viewer can have issues if the "Network Filter" setting in the classic confíguration wizard (System Administration>Network) is incorrectly set. Verify that you have no filter, or an appropriate setting. Filter is recommended if any server has more than one NIC installed.
You should file a support case unless you can resolve this problem.
I know the connection viewer can have issues if the "Network Filter" setting in the classic confíguration wizard (System Administration>Network) is incorrectly set. Verify that you have no filter, or an appropriate setting. Filter is recommended if any server has more than one NIC installed.
You should file a support case unless you can resolve this problem.
0
Responding to outside received question in Swedish language:
- RNRP is mandatory for use of System 800xA starting with v. 5.1
- The service connection viewer may be depedendant on RNRP and proper filter setting - the main purpose is "connection viewing" NOT service status.
For service status, please use System Status Viewer or afwservicestatus.exe
This question seem to involve a single engineering node system; then these warnings can be ignored...
A properly running 800xA production system should have static IP addresses, RNRP running and a proper Network Filter setting (if more than one NIC is used in any server).
Add new comment