OIS43 Console Failed - IIMLM01 & IIMCP02 leds flash on power up. Looking for some troubleshooting suggestions.
When I turn the power on, the IIMLM01 - Loop Module and the IIMCP02 - Processor Module LEDs all flash and the console does not advance any further.
Any troubleshooting suggestions would be appreciated.
Voted best answer
Not sure what the clicking sound might be, particularly if it doesn't happen now.
The clip shows a constantly lit light on the Alphastation so the AC side could be OK but you might still want to check the AC supply is good inside the console.
From the clip it looks like the DC power supply around the back is failing under load or being pulled down by one of the devices connected to the DC supply. Have a look at the DC levels, it might give a you hint as to where the problem lies, although 5V is a fair guess from the clip. You could try selectively unplugging the output cables on the power supplies to see if anything is pulling the power supply down. Have a look at the wiring diagram as the DC supplies are used for other duties beside the card cage. If you are happy there are no shorts on the supply you could swap the supply itself.