Why drive composer entry v.2.1 can not detect my abb acs 580 drive?
I use usb cable for connect pc to drive.
After connect pc to drive , Drive detect connection and display an image that drive connected to usb.
Then i open drive composer entry v.2.1 and it try to detect drives but get message that no drive found!
What is problem?
Is need some setting in drive parameters?
Voted best answer
your operating system on PC?
Have you correct installed the driver for the ABB panel?
This is necessary for the communication between PC and Drive
After the Drive Composer Entry start, in menu--> settings have you correct defined the COM port in your PC to connect to the drive?
The USB cable - Mini USB between PC and drive programming panel - USB port - is that right?
In the ACS 580 drive you don't need to made any settings, when the Drive Composer SW is starting, and the COM port is correct defined, the PC starting automatically the communication and you can see the parameter list on the screen.