Add new comment
I will be very grateful if you want to help me to write down any parameters that need to be setup. because I've tried setting it like the example PID programming on ACS 355 but it didn't work ... I want to setup so the pump can run with constant pressure. so what if the teknan goes up the pump will reduce the rpm to keep the pressure constant
each drive has its characteristic parameters to work with a PID, however the ACS355 tutorial you read, I realized by carefully reading the instructions provided in the FW manual, it just takes a little patience .... I'll try to see if I have notes somewhere, but I don't think I'll be able to do it soon.
thank you very much . I am happy to look forward to that
Source: ABB library