MOD 300 Simulation
Have to rebuild objects and graphics in 800xA SV6.0.3 from a migration from SV4.1, built in Virtual Machines, I do not have physical MOD 300 controller to connect, but need to test objects and graphics. Is there any app, solution, OPC Server app to simulate MOD 300 signals? How can I do it without controller?
Help please, thanks
Answer this question Follow
We used a single Engineering Station and loaded some CCF blocks into the RTA board.
Other questions needing answers
DCS in general >
Control systems >
System version >
Application Knowledge Store (AKS) will no longer be available after the 31 July 2021.
We are enhancing our Customer and Partner experience and will be migrating data from AKS to the new portal.
During the transition please direct your questions to:
If you are an ABB customer with a CARE Agreement you can access our Customer Portal, where you can find solutions and ask questions, and communicate directly with ABB.
If you are not an existing CARE customer with ABB please contact your local ABB sales office.
For our authorised Partners you can directly access additional support information in the Partner Portal