ACS880 via EFB (D2D-MODBUS RTU)
After setting up many parameters, I could receive and transmit packets.
Others were OK but CW/Ref showed up in 58.07.
How can I solve the problem?
Are there any parameters that I need to set?
Thank you for your advise.
I followed your instructions and set up the parameters as below.
1. P. 19
2. P. 20
3. P. 22
4. P. 58
As you can see, CW/Ref still showed up in P. 58.7.
Is there any way to solve it?
Btw, I can use ACS850 via CP610 with embedded fieldbus (MODBUS RTU).