How to setting up ABBCS550 for communication by modbus and RS485 ?
I setting up drive in remote mode and now displayed REM word in monitor.
I for activate standard Modbus, set parameter 9802 to 1.
RS485 port installed to drive currently!
Is Enough this cases for setting up drive for start programming by modbus ?
I for activate standard Modbus, set parameter 9802 to 1.
RS485 port installed to drive currently!
Is Enough this cases for setting up drive for start programming by modbus ?
Asked 1 year ago
Answers
0
Hi
to activate the EFB ModBus in ACS550 you need to follow the FW manual instruction. Other group to program:
group 10 for the activation start - stop
group 11 for the speed reference
group 16 for reset and run enable
.....
.....
FW manual instruction, available on:
https://library.e.abb.com/public/313b...
Hope this help you
BR
Flavio
to activate the EFB ModBus in ACS550 you need to follow the FW manual instruction. Other group to program:
group 10 for the activation start - stop
group 11 for the speed reference
group 16 for reset and run enable
.....
.....
FW manual instruction, available on:
https://library.e.abb.com/public/313b...
Hope this help you
BR
Flavio
Source: ACS550 FW MANUAL
Add new comment