upgrade the frimware
I'm going to upgrade my drive software. My drives software are AINF6 with version 2.5 , i have LP_Firmware.lp file version 2.5 and drive loader2.3 . How can I upgrade drive software to version 2.9?
Asked 9 months ago
Voted best answer
1
Hi
to upgrade the SW at 2.9 version you must have the correct version from ABB library. Generally this operation is done by Service or authorized partner.
IMHO the sharing of SW versions of drives not in line with the central database of ABB can produce problems in the event of spare parts or maintenance, I suggest you contact your authorized ABB area distributor.
BR
Flavio
to upgrade the SW at 2.9 version you must have the correct version from ABB library. Generally this operation is done by Service or authorized partner.
IMHO the sharing of SW versions of drives not in line with the central database of ABB can produce problems in the event of spare parts or maintenance, I suggest you contact your authorized ABB area distributor.
BR
Flavio
Answers
1
Hi, as far as I'm concerned, you have a ZCU as your control unit. You should run DriveLoader and connect to the drive, then open the *.lp file, there you can check the version on the drive with that of the file.
The *.lp file must contain firmware version 2.9.
Can you share that version? I have ACS880-04 with firmware 2.52.
Best regards
The *.lp file must contain firmware version 2.9.
Can you share that version? I have ACS880-04 with firmware 2.52.
Best regards
Answered 9 months ago
0
I have driveloader 2.4 but none lp file for testing and help you.
regards
regards
Answered 9 months ago
Add new comment