How can i reset factory of ABB ACS550 parameters in Statndars mode?
I try to start programing for ABB Acs550 drive via modbus.
First i want to reset parameters of drive to i sure that all assigned values be reset to default value.
I power on drive and set to local mode.

Then I go to PAR>99>9902>1 path and press enter and set to select Standard mode.
Then I shut down and power on drive.
Is reset all params in this case?
If No How to do this?
First i want to reset parameters of drive to i sure that all assigned values be reset to default value.
I power on drive and set to local mode.

Then I go to PAR>99>9902>1 path and press enter and set to select Standard mode.
Then I shut down and power on drive.
Is reset all params in this case?
If No How to do this?
Answers
Hi
modifying the ACS550 application macro is a way to reset the drive, but not all parameters are deleted only with this function.
I suggest you check all the parametric groups after changing the operating macro.
Hope this help you
BR
Flavio
modifying the ACS550 application macro is a way to reset the drive, but not all parameters are deleted only with this function.
I suggest you check all the parametric groups after changing the operating macro.
Hope this help you
BR
Flavio
Add new comment