ACS880 Ramp set selection via fieldbus/Profibus. Help?
We trying to toggle between acceleration time 1 and acceleration time 2 via profibus but could not find anything in manual. We are currently using PPO 5 type in control builder Any help would be highly appreciated
Hi I don't have the simulator with me at the moment to do a test but you could try to modify parameter 23.11 using one of the available bits of the CW, for example selecting other -> P6.3.12 that is the twelfth bit of the CW that is usually not used in theclassic start and stop commands 1151 - 1150.