Auto Hide taskbar in 800XA 6.0.3.2 Workplace
Is there any way to make the task basr auto hide so that operator station will login in full screen in Operator mode, we have set GPO to prevent the operator accessing the system ?
We did not find any GPO setting for the same , windows 2016 and Windows 10 is the operating system
We did not find any GPO setting for the same , windows 2016 and Windows 10 is the operating system
Asked 2 years ago
Answers
1
Dear ,
There is two modes for Operator workplace
Operator workplace mode which is fit to the full screen
Windows workplace mode which gives taskbar to user
For that we need to the following procedure
Select the operator user in user structure and select the workplace profile values aspect
In names section select the workplace mode and in the datasource select the local
And in the right side select the workplace mode from the drop down menu
Check the enable update and click apply
Kindly refer the attached document for your ref.
There is two modes for Operator workplace
Operator workplace mode which is fit to the full screen
Windows workplace mode which gives taskbar to user
For that we need to the following procedure
Select the operator user in user structure and select the workplace profile values aspect
In names section select the workplace mode and in the datasource select the local
And in the right side select the workplace mode from the drop down menu
Check the enable update and click apply
Kindly refer the attached document for your ref.
Answered 2 years ago
Add new comment