ISP configuration on AI890
Hi,
Has anyone tested ISP function on AI890?
My requirement is to set analog input to 100% when transmitter is in fault or when signal error occurs.
Configured AI890 as below: configured one channel on AI890 with ISP 100% on settings tab.
AI890 settings tab> select the ISP control channel - 'Set ISP value' and gave value '100%' at the ISP value channel.
Generated signal error but analogue signal did not change to 100% .
Can some one guide me how to achieve ISP function on AI890?
Thanks
MNair
I had to revert my changes so I don't have image of setting tab. But I do have image of difference report that I will share.

Has anyone tested ISP function on AI890?
My requirement is to set analog input to 100% when transmitter is in fault or when signal error occurs.
Configured AI890 as below: configured one channel on AI890 with ISP 100% on settings tab.
AI890 settings tab> select the ISP control channel - 'Set ISP value' and gave value '100%' at the ISP value channel.
Generated signal error but analogue signal did not change to 100% .
Can some one guide me how to achieve ISP function on AI890?
Thanks
MNair
I had to revert my changes so I don't have image of setting tab. But I do have image of difference report that I will share.


Add new comment