parameter mixed up on ABB ACS 880-37 – BCU2
found the system was not enable to read memory module and its parameters and gave “U”
warning indication on its 7-segment indicator also given FB14 error code on its assistant control panel.
Tried to reinstall its firmware, the memory module recognized by the
unit and its “U” indication changed to the “O” normal condition. But some of parameter was not showing and all descriptions of all parameters data wasn’t showing. in shorten all data was mix up and not showing correctly in number of parameters and data...
Voted best answer
the fault indication FB14 concerns a problem of the memory unit of your drive. If you contact your local ABB distributor, you can give more information about the solution to the problem. There is also a specific procedure for restoring this problem. Ask your ABB retailer who can provide you with all the relevant information.
Hope this help you