parameter ACS800 to ACS880
Hello,
In our cement factory we have changed ACS880 by ACS880 Drive, the problem I encountered during programming it is the relay R01 command signal of main contractor 09.09.13.
how we can receive the Command signal on ACS880, parameter 53.3 FBA data out3.
please find attached configuration ACS800 and ACS880.
Best Regard.



In our cement factory we have changed ACS880 by ACS880 Drive, the problem I encountered during programming it is the relay R01 command signal of main contractor 09.09.13.
how we can receive the Command signal on ACS880, parameter 53.3 FBA data out3.
please find attached configuration ACS800 and ACS880.
Best Regard.




Answers
This question has not yet been answered.
Add new comment