Remove 800xA for Harmony from V5.0 SP2 RevE system
Hello,
I am currently working on upgrading an existing SV5.0 SP2 RevE system to the latest 800xA System 6.0.3.2. This upgrade involves conversion of all VB based graphics to PG2 graphics, removal of 800xA for Harmony.
Presently all Harmony system IOs and tags have been migrated to AC800M system at Plant.However, the Harmony Server Object and the INFI90 signal object instances are still present in the 800xA system.These objects are no longer used and must be removed.
After going through various posts on 5.0 to 6.0 upgrade, I shall follow the following steps,
1) Upgrade the 5.0 SP2 RevE system to 5.1 RevE on a VM
2) Use the Migration Tool available in the 5.1 system to convert the VB graphics to PG2 graphics
3) Upgrade the 5.1 RevE system to latest 6.0.3.2 system, on new PC hardware
Q1- Is the above procedure the best way forward?
Q2- How long does it take to convert approximately 130 VB Graphic Displays to PG2 displays?
Q3- How can I remove everything associated with 800xA for harmony from the 800xA system and at what step of the upgrade?
Regards
Rahil
I am currently working on upgrading an existing SV5.0 SP2 RevE system to the latest 800xA System 6.0.3.2. This upgrade involves conversion of all VB based graphics to PG2 graphics, removal of 800xA for Harmony.
Presently all Harmony system IOs and tags have been migrated to AC800M system at Plant.However, the Harmony Server Object and the INFI90 signal object instances are still present in the 800xA system.These objects are no longer used and must be removed.
After going through various posts on 5.0 to 6.0 upgrade, I shall follow the following steps,
1) Upgrade the 5.0 SP2 RevE system to 5.1 RevE on a VM
2) Use the Migration Tool available in the 5.1 system to convert the VB graphics to PG2 graphics
3) Upgrade the 5.1 RevE system to latest 6.0.3.2 system, on new PC hardware
Q1- Is the above procedure the best way forward?
Q2- How long does it take to convert approximately 130 VB Graphic Displays to PG2 displays?
Q3- How can I remove everything associated with 800xA for harmony from the 800xA system and at what step of the upgrade?
Regards
Rahil
Voted best answer
I would add a step between 5.1 and 6.0 and import the things you need in a clean 5.1 system. That way you can get rid of harmony and clean out vb graphics. The conversion time greatly depends on weather you have custom made vb typicals or typicals in a standard library which allready has a pg2 library.
Add new comment