How to send OPC AE to third part system like OPC Datas..?
Hello,
Like we are transferring OPC Data through DCOM/Matricon to third party system, Is it possible to transfer Alarm & Events.
If yes, anybody can guide how to do.! plz share any manuals, if any..!
Like we are transferring OPC Data through DCOM/Matricon to third party system, Is it possible to transfer Alarm & Events.
If yes, anybody can guide how to do.! plz share any manuals, if any..!
Asked 8 months ago
Voted best answer
3
Hi,
Yes it's possible. DCOM settings would remain that same. In this case the third party system will be the alarm server and must be capable of reading OPC AE data. I have tested this using matrikon and sifting opc clients.
Good luck
Yes it's possible. DCOM settings would remain that same. In this case the third party system will be the alarm server and must be capable of reading OPC AE data. I have tested this using matrikon and sifting opc clients.
Good luck
Answered 8 months ago
Answers
1
Refer document 3BDS011222-600_C_en_System_800xA_6.0_Configuration Page no 508, using third Party AE client try to access OPC AE program ID: ABB.OPCEventServer.1. Ensure DCOM settings are done properly as per guide requirements.
Answered 8 months ago
0
The Matrikon tunnel unfortunately does not support all the functionalities of AE.
Read the handbook before you use the matrikon tunnel. Other tunnel software e.g. softing are better for AE
Read the handbook before you use the matrikon tunnel. Other tunnel software e.g. softing are better for AE
Answered 8 months ago
Add new comment