Missing Controller HW after upgrade from 4.1
After upgrade from 800xA 4.1 to 5.1 sp2 , Hardware controller is missing.
Checked the manual and nothing is mentioned except for the normal procedures of full system back up and restore. I know there is a different hardware library and something should be done but I don't have the manual or the files for it.
Answer this question Follow
Have you looked in 2PAA113553-600, page 87? There is a procedure for upgrade of Control Builder M projects, due to the new HW definition, starting from 5.0, comparing to 4.1. Generally, all the Control Builder projects have to be Upgraded from CBM first, then the old HW definitions should be deleted from Object Type Structure.
Other questions needing answers
Application Knowledge Store (AKS) will no longer be available after the 31 July 2021.
We are enhancing our Customer and Partner experience and will be migrating data from AKS to the new portal.
During the transition please direct your questions to:
If you are an ABB customer with a CARE Agreement you can access our Customer Portal, where you can find solutions and ask questions, and communicate directly with ABB.
If you are not an existing CARE customer with ABB please contact your local ABB sales office.
For our authorised Partners you can directly access additional support information in the Partner Portal