Any AC800M Hardware Library for S500 Profinet
There is now a Library for S500 I/O System connected to AC800M with Profibus released...
Does anyone have/know of a library for AC800M to connect S500 via Profinet, not just simple .gsxml import but with proper Signal to RealIO conversion etc.?
Answers
0
https://search-ext.abb.com/library/Do...
please launch this link for the ZIP
I hope this helps
Some of the existing hardware lib for PNIO adapters
ABBDrvRetaCI871HwLib
ABBDrvFenaCI871HwLib
please launch this link for the ZIP
I hope this helps
Some of the existing hardware lib for PNIO adapters
ABBDrvRetaCI871HwLib
ABBDrvFenaCI871HwLib
Answered 11 months ago
0
Converting an Integer datatype to a RealIO for analog signals you have to refer Advanced ADV settings
In PNIO, Integer value can be mapped to RealIO. The Advanced settings can be
configured for channels having a data type value as Int16+IOPS=>Real.
ADV offers possibilities like byte swapping, scaling, ranging etc.
A sequence of steps is required to be followed to map the Integer value to a RealIO
value.
For detailed steps please refer the document 3BDS021515-600 A page no 131
good luck friend
Source 3BDS021515-600
In PNIO, Integer value can be mapped to RealIO. The Advanced settings can be
configured for channels having a data type value as Int16+IOPS=>Real.
ADV offers possibilities like byte swapping, scaling, ranging etc.
A sequence of steps is required to be followed to map the Integer value to a RealIO
value.
For detailed steps please refer the document 3BDS021515-600 A page no 131
good luck friend
Source 3BDS021515-600
Answered 11 months ago
Add new comment