800xA Workplace Windows Aspect behaviour
as you already know during a commissioning it could happen to use 800xA workplace in window mode
with engineering privileges an having need to mantaing a lot of windows aspect "pinned".
I work especially with MOD300 systems with 800xA clients ( 5.1 rev C,D ) .
There is a situation that really bother me on 800xA client and, actually,
I do not really know if it could be corrected easily.
If I need to call up a graphic aspect, faceplate etc.. that I need to keep "always" overlapped ,
the first thing I always try to do is "to pin" the aspect , but,
what happen if I do a click on the workplace window below ?
The "pinned" aspect disappear !
I kindly ask you, is there any method to solve this issue, or maybe
it depends only on the workplace mode selected.
PS : By the way, I keep having care of a couple of HP B2600 Advant Station praying that they will never leave me alone..
Yes, this can be easily corrected. Reason is you are not working in Full Screen mode. If you enable Full Screen option for your workplace, all the faceplates, graphic aspects, etc. will stay even if you click anywhere on the workplace.
To enable Full Screen mode, select this icon marked in red rectangle.
If you don't find this option on your Workplace, you will need to enable this from Application Bar:
In workplace mode your main screen stays at the back as a full desktop and your pinned displays, engineering tools, spreadsheets etc will stay on top.
If you regularly work in windows mode, then don't hide the task bar.