Communication Socket TCP: PLC AC500 & ABB robot
Hi Flavio,
I am researching how the PLC AC500 can send data ("string" format) to ABB robot via Socket TCP protocol.
Does it should be done with the library "SysLibSockets.lib" ??
I read the HelpDocumentation but there is a little bit information without example/program sample (how to define variables, connect various Function Block (FB), configure,...etc. ).
Hope that your expertise can help me. I use the processor PM583-ETH.
Thank you a lot.
Thuan
I am researching how the PLC AC500 can send data ("string" format) to ABB robot via Socket TCP protocol.
Does it should be done with the library "SysLibSockets.lib" ??
I read the HelpDocumentation but there is a little bit information without example/program sample (how to define variables, connect various Function Block (FB), configure,...etc. ).
Hope that your expertise can help me. I use the processor PM583-ETH.
Thank you a lot.
Thuan
Asked 2 years ago
Answers
0
Hi
you can find at the follow link some example of communication between AC500 PLC and ABB robot
http://www.abb.com/abblibrary/Downloa...
Some examples are via Profinet, I hope this help you, I not have any example as you requested via Socket TCP protocol
you can find at the follow link some example of communication between AC500 PLC and ABB robot
http://www.abb.com/abblibrary/Downloa...
Some examples are via Profinet, I hope this help you, I not have any example as you requested via Socket TCP protocol
Answered 2 years ago
Add new comment