Problems in IP configuration in AC800M
I am not able to configure IP address in AC800M controller.
I have updated the firmware.
When I am trying to connect the controller using IPconfig tool It detects the controller reset when I press the Init Button. But still it fails to connect and says connection time out.
There is no redundant controller connected with it.
kindly help in getting a solution to the problem.
1. Remove any connected battery (external/internal) and try again.
2. IP change can also be made from Control Builder M. Download the *new* desired IP-address to the *old* (put the new address in the HW-configuration tree's Ethernet 1 and Ethernet 2 but use the old address as Controller Identity). After download has completed, perform controller reset and update Controller Identity to the new address.
Old existing address is visible in controller's serial output shortly after power up. Connect serial cable to port four, make controller reset and listen with Hyperterminal (Win XP) or PuTTY.exe (Internet freeware).