AC450 RMC HALT WITH OB ERROR
We are facing some AC450 faults for one of our customers, where controllers are going to 0B Fault intermittently.
It is a 4 CPU 14 slot rack, running with AC450 RMC.
Attached are 2 halt codes from 2 CPUS, taking during the fault, along with the system messages from all 4 cpus.
Can you help us giving some insights on the root cause please.
Matter a bit urgent, as it has already come 5-6 times in different CPUs. We have taken some corrective actions, however the root cause is yet to be determined.
Asked 3 months ago
Answers
0
Out of office, unable to verify but 0B could be PROM Checksum Error.
=> replace memory/CPU board
A post mortem analyze should tell which address (=memory module) where the corruption was found.
Please contact regional ABB service for assistance with analyze & spare parts.
=> replace memory/CPU board
A post mortem analyze should tell which address (=memory module) where the corruption was found.
Please contact regional ABB service for assistance with analyze & spare parts.
Add new comment