AC800M HI PM865 firmware uncertified
We are using Control Builder M Professioanl, Version 5.1.1-2.
Firmware on CPU is FW865HI version 5.1.1200.6 meanwhile on Eng Machine we have FW865HI 5.1.1110.6 (BasicHIwLib 5.1-1)
On SM811 the firmware is 5.1.1130.0 and the same on Eng machine
At the moment looking the Diagnostic HW windows on CBP on CPU PM865 we are reading on ExtendedStatus the message "Uncertified Firmware in SM, Redundant mode enabled".
How is it possibile to fix this error? Do e need to downgrade the firmware on PM865?
Do we need to have the same compatible firmware "version" on PM865 and SM811?
Thank you very much for the support
You have to upgrade the firmware to 5.1.1110.6 to Controller & 5.1.1130.0 to SM811 to ensure saferty certified firmware since FP4 base version have the NON-CERT firmware so after loading 5.1 FP4 there is a certified correction-1(CC1) to make the firmware CERTIFIED since it looks you have already loaded the CC hence you just upgrade the firmware in online or offline.
Refer the release notes
3BSE076787 Systen 800xA 5.1 FP4 CC1 Control Software for AC 800M High Integrity Controller Release Notes