AO801 generating upto 17 mA
All channels of one AO801 module is generating 4-17 mA, however in the same panel other AO modules are generating 4-20 mA output (means under same conditions).
Is that AO801 gotfaulty? Or may be any other issue.
Try forcing AO channels with 100% channel value (status tab), but check if Min/Max settings (properties tab) are 0/100% and fraction is 1.
Then connect mA meter to the output and measure the current. The MAX resistance in output circuit (current look) is 850 ohms. If it is higher, you may be will not have 20mA.
Also, AO channels are groupwise isolated from the ground. If AO801 is from the same cluster, that you applied 230VAC insted of 24VDC, it could be affected too
1-, 2-... are directly connected to L-.