Property Transfer Definition 800xa v6.0
Is there any manual or guide which explains step by step procedure of making Property Transfer definition aspect work?
Voted best answer
I'm uncertain if you have managed to get it to work or not.
There is not so much to tell about Property Transfers.
- You could have a look at this recent thread for an example: http://www402.abbext.com/AC400-Data-AC800M-q1952465.aspx
- It could be advisable to use Find Tool to find all aspects of category = Property Transfer Definition and erase them (to get to a clean configuration)
- You could start off by trying to transfer a General Property value from one GP to another GP just as a test to verify your syntax is correct before trying to read real OPC data.
- The errors seen on the other thread is new to me, I sincerely recommend beginning from scratch with a very simple transfer first.
- Object types must match
Post additional information regarding the problem on this thread if you like me to comment.
Don't rule out engaging your regional ABB support center.