How to Connecting SIEMENS S7 CPU to ABB MasterPiece 200/1 DSPC 172 CPU
One way of Connecting SIEMENS S7 CPU to ABB MasterPiece 200/1 DSPC 172 CPU is using PCS 7 Gateway to ABB Advant (CM104-MB300 gateway) but I want to do it using ABB equipments.
1- As I undestood from manuals I have two ways:
a- EXCOM and DSCA 114
b- SIEMENS 3964(R) and DSCA 180F
Is it true?
2- At first I need "ABB Master EXCOM User's Manual" and ’’MasterPiece 200/1 Multivendor Interface/Siemens 3964(R)" manual for ABB MasterPiece 200/1. Do you have them?
3-Could you please send me the price and user's manual of MultiVendor Interface card DSCA 180F (ABB 57520001-KM DSCA 180F Communication Processor.)?
some details :
MasterPiece 200/1 -
Siemens 3964(R) 7650 111-221
Contains a technical description, instruction for
installation, start-up, design and fault tracing for
MasterPiece 200/1 - MVI/Siemens 3964(R)"
4- Is it possible to use PU410 to join SIEMENS S7 CPU to ABB MasterPiece 200/1 CPU?
My mail is firstname.lastname@example.org
1) Already answered by Rob Lyon on your other thread.
2) The manuals are proprietary and not publically available for download. With an account on ABB Library/SolutionsBank you can download them. Your regional ABB sales representative should be able to assist you with this. The manuals are also available on the Advant OCS with Master Software User Documentation CDROM (article number 3BSE008143R1201)
3) This is an open forum, not a sales site. Please speak with your regional ABB sales representative about purchasing ABB software and hardware.
4) No. PU410 is only possible to use with Control Builder A 1.3 and forward and System 800xA version 5.0 and forward (as part of the MB300 OPC Server).