1. Is it possible to have a startup bypass for the GTHHAct / GTHAct bits of the detector2real outputs? Something like startup bypass timer. Which means the action is triggered after sometime which is configurable through HMI.
2. Is it possible have Override Enable/Disable Control using hardwired digital input signal?
1. There is no built in startup bypass for the SupervisionLib but you can create your own and utilize the boolean paramters 'InhGTHHAct' and 'InhGTHAct' of the Detector2Real object to inhibit the HH and H actions. Just tie this boolean to your own timer object.
2. Enabling and Disabling overrides is accomplished via the OverrideControlInterface object from the Supervision library with the parameter called 'EnableOverride'. You will have to connect this OverrideControlInterface via an override connection to a superivision overview so that it properly propogates the signal down to your detectors.
Control Builder help has quite a bit of information for SupervisionLib objects.
Hope this helps,
Source: Control Builder Help for SupervisionBasicLib Objects