PID programming on ACS355
I'm having trouble configuring a ACS355 drive for a PID control macro.
So far, I've configured all the parameters I've deemed necessary for it (Analong inputs, all the 40xx parameters and the basic ones for the motor configuration), but I've had no luck yet. I've also looked online but haven't found anything that could help me. One problem is that I'm doing it on a Standard Control Pad, which makes finding help harder.
Could anyone help or share with me a document explaining how to do this procedure?
Thanks a lot!
Have you looked in ACS355 User's manual? It is always better to look in the manual and go trough the parameters manually.
Doesn't matter if you are using Standard Control Panel - you can modify all the parameters trough it.
Please describe what is you "trouble" - drive is not starting, PID is not working correctly...
May be the easiest way in your case is to select PID Macro in 99.02 and then use the predefined I/O's. Once you start the drive, you can modify the I/O's settings and other parameters according to your needs.