RTUTil 560 Import an Excel
I need to add to an existing RTU560 a new CMU05. This will comunicate with IED´s and 2 NCC.
I configure my excel and when i import again the excel in RTUTil560 all data are duplicate.
What i am doing wrong?
I need to initialize the excel interface because e add new columms about the IEC 60870-5-104 Address/Host Parameter. For this initialization i use a exported excel after i add the CMU05.
After doing configuration on RTUtil you shoud first export all database to excell and then complete the excell file with new signals related to new IED's. please note that you before have to add networks and protocol for new CMU in network tree and link them in Hardware tree to the relevant ports on the new CMU. In order to prevent duplicating signals you must delete all signals both in signal tree and in Hardward tree bellow IEDs
here you could find the brief procedure as bellow
Save as rtu file with new name --> add new cmu --> add new network tree and configure protocols (SLave/Master) -->Link network to New CMU--> export file to Excell--> delete all signal (signal tree and IED's signal)--> configure Excell--> inialize RTUfile with the Excell--> import Excell
I hope I could help you
just please inform me which revision of firmware you are working with?