800xA Alarm&Events is on wrong Time and Date
Alarm&Events in my system is wrong Time and Date. For example: Now is 24/12 but it show 25/12 (image attached for details).
Can anyone help me?
Voted best answer
Alarms and events are delivered with time from the controller.
Typically the clocks in 800xA clients and servers slave to the controller time via some clock synch protocol (SNTP, CNCP, etc)
-> verify your clock synch setup and time sources!
Events with future time can not be erased on individual basis; to clear them before present time catches up you must Cold Start the Event Storage service (all events will then be erased).