How to configure Redundant Server for 800xA 6.0
I wonder how to configure Redundant Server(window server2012) for 800xA 6.0.
I want to make redundant server for 800xA 6.0.
So, I installed Primary & Secondary Server and tried to deploy Sec. Server in configuration Console of Prim. Server.
But, faliure massage in Sec. Server happened like attached pictures.
I can't find detail redundant server configuration in 800xA 6.0 Installation Manual.
If you know about that or have other manual, let me know and share.
Voted best answer
To make the node redundant, select "Make Redundant" in node configuration tab. This gets enabled once you have selected some node functions on the node which you want to make redundant.
E.g: ASCS2 is redundant of ASCS1. Then select ASCS1 and then press the "Make redundant" button and select the functions you want to make redundant.
In 6.0, the change has been that you can define on your own which functions you want to make redundant. Previously it was the whole node.
Please make sure you have run the NPT in ASCS2 before deploy the node functions in ASCS2. NPT will copy the media to the local repository and install the 800xA Base and CLS.
Once NPT successfully completed click 'Make Redundant' in node configuration tab which make ASCS2 as redundant to ASCS1.
Then deploy ASCS2.