ALT TAB for operator in 800xA
It is possible to allow to minimize workplace window for operator? ALT+Tab function is no working. I've tried to use Workplace Profile Values (set to WORKPLACE MODE: Windows Workplace Mode) to config that but in result I've recieved not fullscreened window on start.
Working system: ver. 5.1 FP4
Voted best answer
>"I need to allow operator access to Excel but I need default view for workplace in full screen"
If you start excel from a "Windows Application" aspect inside the workplace then it should appear on top of the workplace. Keep the workplace as full screen in "Workplace Mode" at all times. ( Make sure that all operators have the Workplace mode set to "Operator workplace" in the User Profile's [User Structure -> Your Groups -> Your Operators -> Workplace Profile Values (Aspect)]
If you want an Excel application to appear in the Base Workplace ( ie embedded into the 800xA operator display area ) then it is "possible" but this requires changes to the View Class Definitions which is really beyond the scope of this reply.