LED status color on AC800F
I have a PM802F on Freelance 6.2 composed of :
SA 801F, EI803F & FI830F
Since yesterday nothing is working, and LED status changed color, before all was in Green, and now I have the Satus LED of network card EI803F in red and the LED from Profibus FI 830F in Orange.
I tried to install a new network card EI803F, but without success...
So what is the signification of those LED, where is my problem ?
thanks for your help
What is status of Failure and run/stop LED on SA 801F ? it's blinking red or steady red ?
Is it single controller or redundant controllers ? Will be great if you can get picture of controller. There are several possibilities based on single or redundant controller. getting answer to these questions will help in getting correct situation.
Mean time check Ethernet netowrk ? check if any switch part of network is not powered off ? Check if Controller is getting correct volatge level ? Check if incase redundancy there are no profibus loose connection, no loose connection of ethernet cable and red. link cable. there is active/primary contoller.
Are you able to ping controller? if so check if you can call web browser, not sure if that is possible in V6.2.
thanks for your help.
The red on EI 803 is steady red, on SA801F all in Green
it is a single controller (PM802F + SA801f+ 1x EI803F + 1x FI803F)
The power supply shows ok.
Checked the Ethernet connection by IT person and all fine
We are not more able to ping the controller with PC.
WE tryied with spare EI803F card, but exactly same problem,
some idea ?