acs 800 with ac500 profibus communication issue
I am not completely clear your issue. I have tested ACS_DRIVES_CTRL_STANDARD_GEN FB with PM573-ETH and ACS800 + RPBA-01.This is working perfectly for me.It will be good if you can elabrote your issue further and attach some sample program in which you are facing issue.
Additonaly as you are using ACS_DRIVES_CTRL_STANDARD_GEN FB , if you need to provide any referece (Ref1 or Ref 2) to drive you need to additionally use one more FB called ACS_REF_SCALING. Insted of this you can use ACS_DRIVES_CTRL_STANDARD FB where you dont have to use one more additoinl FB for providing Ref.
there is no issue in starting,stopping, giving reference to the drive, it all works fine. the issue is the ready bit (sz_prs_ready) see attchmnt. ,is true in the pgm(plc) but the drive (acs800) is not showing the ready symbol '0' instead it is blank(see attchmnt).
to be short my question is when i move the value 1150 to the cw of the acs 800 i dont get ready symbol in the cdp of the drive . i ve checked the run enable bit . instead when i move 1143 value to the cw the drive shows the ready symbol(0 in top right corner of the cdp). please suggest the correct one.