AI801 peaks on three channels, no errors in unit status
Settings (Hardware) is 4-20mA on all channels and process instrument says 7 mA on the channels peaking to the value set under Properties tab (Hardware).
Tried to move one of the signals to another IO-unit nut the error followed.
Any suggestions?
Asked 3 years ago
Answers
0
And of course, after struggling with this problem for days and finally posted this question, the problem was solved by changing the scaling. Which I thought was correct in the first place since this has been working fine for years...
Someone or something, somehow at some point obviously has changed the scaling (min-max) to some stupid values!
Seems to work as expected now.
Answered 3 years ago
by Dash
didn't get the part "process instrument says 7 mA on the channels peaking to the value set under Properties tab "
Kindly elaborate..
by hobe Rank: 2820 on 3/7/2018 6:26:18 AM | Like (0) | Report
7mA when messuered the wire with fluke clamp meter 771 (mA).
by kstoilov
Your question is not clear - please explain better.
What do you mean pick to the value set under...
by hobe Rank: 2820 on 3/7/2018 6:32:32 AM | Like (0) | Report
...Hardware config, AI801 Settings tab.
Add new comment