ASCS1 all of the services is undefined server and redundancy problem
I have 800xa PLC Connect 5.0.2
I have serious issue with ASCS1 all of services in service structure,
Some day we had a problem with alarm managment where every alarm is generted we use to get PLC_1 in the alarm list i have done all the standard reconfiguration to make the alarm as per TAG_name and desciption but the issue was not solved,later we decided to restore maintenance backup which was took few days back with 0 ERRORS and 0 WARNINGS from ASCS2 server,
I have restored the maintenance backup which took on ASCS2 in ASCS1, but the restoration was not successful,trying to add ASCS2 as redundent dint add, so i have deleted the system again from ASCS1 and I restored in ASCS2 as per normal restore procedure through maintenance structure later i have added ASCS1 as the redundent server PPA became Green but the services in the services of ASCS1 are undefined, when i check in the Service Connection Viewer i can see only ASCS2 services are only running no ASCS1 services running. i have tried to delete the services and reconfigure but dint work still in the ASCS2 server only ASCS2 services are running.
Can you guys tell what might be the reason now as u and i know that there is no server redundency only ASCS2 services are running, none of ASCS1 services are in service, as the plant is in risk if ASCS2 goes down then defintly the plant will DCS will shutdown, do you have any idea how to get ASCS1 in services healthy without disturbing operation.