OPC Client license
Where I can check how many 800xA OPC Client license need to be purchased ?
I couldn't able to see the OPC Client license in use in the "License Usage" aspect.
I used 800xA temporary license to test the solution.
Configuration is using Kepware OPC connectivity suite to inerface 3rd party OPC DA server...
Communication is OPC UA....I have firewall in between two networks...
Note that I have OPC write to 3rd party server using Property transfer aspect.
Now I want to double check does I need to purchase any OPC Client license.
Any idea how I can verify the OPC Client license usage in my test configuration.
The "OPC Client License" AFAIK is to allow you to connect a third party OPC client to the 800xA OPC Server. This is not what you are doing.
You are doing the reverse. You are connecting to the KepWare OPC Server and 800xA is the client (with a tunneller in between). You then use Generic OPC Connect to display data on the 800xA system and send data to the remote PLC.
This historically has never required a license.