PLC Connect deploy not working

When trying to deploy PLC Connect configuration I get an error message saying that generic control network is not connected to a service group.

I have configured the Generic Control Network Configuration and assigned to our two connectivity servers. Services is running on both OpcDA and SoftPoint.

Still get this error message. How to troubleshoot?

Snap260.jpg

Comments (0) New comment

industriellITsjel Rank: 911

Asked 3 years ago

Answer this question Follow

Answers

Hello,

swap the aspect services (active to redundant)

/Ronny

Comments (2) New comment

Ronny Lindström AKS expert

Rank: 21

Answered 3 years ago

Check data source key of OPC data source definition aspect it should not all zeros in the aspect .

Comments (1) New comment

Basappa G Rank: 44

Answered 3 years ago

So when I create a new PCN Generic Control Network, call it "PLC Connect", the GCNConfiguration is blank.

Configuring the first CS server here create a Data Source Key that I cannot change in the GCNConfig window.

The key is only able to change in Adapter Data Source Definition, but this does not solve my deploy problem.

Comments (6) New comment

by Ronny Lindström AKS expert

Rank: 21 on 2/9/2018 2:01:49 AM | Like (0) | Report

Did you try what I write, regarding working in Service Structure ?
Do you have two Service groups with one Service Provider or one SG having two Service Providers ?
/Ronny

by industriellITsjel Rank: 911 on 2/9/2018 2:26:28 AM | Like (0) | Report

Under the OpcDA_Connector service, I have 6 service groups.
The "SG_PLC Connect" group has one service provider at the moment.

Under Softpoint Servce service, I have one group called "SG_PLC Connect" also here has one service provider.

by Ronny Lindström AKS expert

Rank: 21 on 2/9/2018 2:58:12 AM | Like (0) | Report

You should not have two Service Groups with same name, confusing...
If you from Workplace Find tool search for the data source key ( {99... ) and then Goto object, where is {99... located in Service Structure ?
Can you also give us a screen dump of the PLC service groups, extended the SP in Service structure ?
/Ronny
/Ronny

by industriellITsjel Rank: 911 on 2/9/2018 3:41:14 AM | Like (0) | Report

The SG names are created automatically when I did GNCConfiguration.

Searching for data source keys does not give any hits, no matter is I try searching for Objects or Aspects.

I will add screenshot of service structure as a new answer, seem that I cannot add picture in comments.

by Ronny Lindström AKS expert

Rank: 21 on 2/9/2018 4:43:30 AM | Like (0) | Report

Rename one of the SG_PLC_Connect.
I think the data source key is bad, as you can't Find it as object.
Try eg to Find regarding the id for one of your SP_CS01 (you find it when right click, Details).
Modify your Data Source Definition by reselect correct SG_PLC_Connect
Regarding my previous comment:
The OPC server identity for both service providers must be: {00000000-0000-0000-0000-000000000000}, this should be the case for all the Service Providers for the OpcDA_Connector of the PLC Connect servers.
/Ronny

by industriellITsjel Rank: 911 on 2/9/2018 5:43:07 AM | Like (0) | Report

Thanks for all suggestions Ronny, but I still are unable to solve this. I think I will have to have an support desk engineer to remote help me here.

Add new comment

industriellITsjel Rank: 911

Answered 3 years ago

Comments (0) New comment

industriellITsjel Rank: 911

Answered 3 years ago

Question details

PLC Connect deploy not working

Answers

Other questions needing answers

Related topics

AKS experts