Not able to modify/ set time of AC-800F Controller.
CPU:- PM 803F
Tool Used:- Tried from Teraterm through serial cable.
Tried from Commissioning-> Option-> Set time.
It has been obserevd that, at one of our project we are using AC-800F PM-803F controller. When we open the web browser of it through IP address; it is showing no time.
Because of this we are not able to see trends also. We have tried to set time throgh Commissioning-> Option-> Set time; but not succeded. We have also tried through Teraterm, but it is not allowing to set time.
File from telnet is attached for refernce.