PM861+CI854A interface with IM153-2
configuring PM861+ CI854A using Compact control builder 6.0
SIEMENS SLAVE ( IM153-2 ) MLFB NO: 6ES7 153-2BA02-0XB0
but i am getting slave station error in the CCB tree structure.
kindly support with LIBRARY file ( *.HWD) for IM153-2 and IO MODULES, attached GSD file.
also procedure for any settings and testing.
The total number of bytes you read or write to a profibus station must match **exactly** the total number of bytes that the station has. As long as you have this total correct, ( and the correct speed settings) the the Profibus device will usually come up and connect to the Profibus master.
Check this number carefully and ensure that your configuration for the profibus IO station matches exactly the hardware you have.
If you still cannot get the device to talk then the ABB inbuilt diagnostics may help a little but are usually too cryptic to be of much use. Open a browser and connect to the Controllers IP address.
For detailed analysis I'd really recomend one of these ... https://procentec.com/products/profit... Its an execellent tool for troublshooting profibus networks.