How to disable I/o warning / Channel error
I have faulty PT100 sensor that is creating a lot of error massages ( 25 per minutes) . Is there a way to block receiving these massages only for one channel?
Example of event list :
17/12/2014 10:41:47.493309AGR_A (0000) Channel error9950200
17/12/2014 10:41:46.493309AGR_A (0000) I/O warning9950200
17/12/2014 10:41:43.493309AGR_A (0000) Channel error9950200
17/12/2014 10:41:42.493309AGR_A (0000) I/O warning9950200
17/12/2014 10:41:41.493309AGR_A (0000) Status OK9950200
17/12/2014 10:41:40.493309AGR_A (0000) I/O warning9950200
17/12/2014 10:41:31.493309AGR_A (0000) Underflow9950200
17/12/2014 10:41:29.494309AGR_A (0000) Channel error, I/O warning9950200Thanks
You can do either of the following:
1.You can block the channel itself by selecting "Deactivate" in the card level settings so that you can stop unwanted alarms & whenever your Tx is ready you can make it "Activate" but ensure you have to download the controller to take effect in both the cases of activating & deactivating the channel.
2.You can disable the alarm by right click & disable the alam but remains in disable condition but you have to ensure once tx is ready you have to make it enable else traking of alarms during maintance may disturb.